Santa Fe Regional charts & airport diagram

What KSAF publishes

Airport diagram

The FAA airport diagram for Santa Fe Regional — runways, taxiways, ramps and hold short lines. Shown in the browser above; the FAA PDF ↗ is the authoritative copy.

Instrument approaches at KSAF

Santa Fe Regional has 8 published instrument approaches of 3 types (ILS, RNAV (GPS) and VOR). 6 of them offer vertical guidance; ILS gives the lowest minimums. One is circling only — bringing you to the airport rather than a runway, to circle for whichever runway the wind favors at circling minimums.

No published approach to runway 10: landing on that end in instrument conditions means a circling approach or a visual after breaking out.

Departures and arrivals

Santa Fe Regional publishes 3 departure procedures (SIDs) — charted routes from the runway to the en route structure, assigned by ATC in the clearance. Each one is in the list at the foot of this page with its continuation pages.

Takeoff, alternate and surface information

• Takeoff minimums are published for KSAF. Standard is 1 statute mile visibility for one and two engine aircraft (½ mile for more than two) unless this section says otherwise; Part 91 operators are not bound by them but the obstacle notes apply to everyone.
• Non standard alternate minimums are published: if you file KSAF as an IFR alternate, the required forecast is higher than the default 600-2 for precision or 800-2 for non precision approaches. Check the alternate rule tool.