SkyReady

Kent State University Airport traffic pattern

Pattern altitude at Kent State University Airport (1G3) is 1,984 ft MSL · 850 AGL as published by the FAA, and every runway end is standard left traffic. · Open on the map

All of Kent State University Airport — runways, frequencies, charts and live weather

Pattern diagram

Drawn to scale from the FAA NASR runway alignments and the per end right traffic flags — pick a runway to see its pattern. Live wind picks the favored runway when 1G3 reports it.

5,000 ftNMNxw 106°downwind 016°base 286°final 196°45° entry1901

RWY 19LEFT traffic

Heading
196° mag · 189° true
Dimensions
4,000 × 60 ft
TPA
1,984 ft MSL · 850 AGL · charted
Surface
ASPH-G
CTAF
122.725

Enter the left downwind (heading 016°) on the 45° at 1,984 ft MSL.

Pattern side: FAA NASR · TPA charted (NASR) · layout: schematic (headings + lengths)

Pattern direction by runway

RunwayPatternHeadingPattern altitude
01 Left traffic 016° mag 1,984 ft MSL · 850 AGL
19 Left traffic 196° mag 1,984 ft MSL · 850 AGL

Pattern altitude is published for 1G3 in the FAA NASR data. Headings are the runway alignment; downwind is the reciprocal.

Flying the pattern at 1G3

Kent State University Airport is non towered, so the pattern is self announced on CTAF 122.725. AC 90-66B asks for a report on entry and on each leg, and for the standard 45° entry to downwind at pattern altitude.

All ends are left traffic, which is the FAR 91.126 default — turns to the left unless the field charts otherwise. The full entry procedure is here →

Frequently asked

What is the traffic pattern altitude at 1G3?

The FAA publishes a traffic pattern altitude of 850 ft AGL for Kent State University Airport, which is 1,984 ft MSL on the altimeter with the field at 1,134 ft.

Does 1G3 have right traffic?

No. All 2 runway ends at Kent State University Airport use standard left traffic, so no right pattern is charted here.

What frequency is the pattern on at 1G3?

Kent State University Airport is non towered, so pattern position reports go on the CTAF, 122.725. AC 90-66B asks for self announcing on entry and on each leg.

More about 1G3

Pattern direction and alignment are drawn from the FAA NASR (28-day cycle); the diagram is generated, not an FAA chart. Pattern altitude is shown as published where NASR carries one, otherwise as the AC 90-66B 1,000 ft AGL convention. For planning and education only; always verify against the Chart Supplement.