SkyReady

Grandview Medical Center Fsed frequencies

Grandview Medical Center Fsed (95AL) in Trussville, AL has no control tower, so nobody is sequencing traffic here — you announce your own position on 122.9. Every frequency below is in the order you tune it. · Open on the map

All of Grandview Medical Center Fsed — runways, frequencies, charts and live weather

Taxi & takeoff

CTAF 122.9
The common frequency pilots use to announce themselves to each other at a field with no operating control tower. Nobody is controlling traffic — you are self announcing. Report your position and intentions on entry and on each leg of the pattern, and listen well before you transmit.

What to say on 122.9

Nobody is sequencing traffic at 95AL, so every call is you telling other aircraft where you are. Open and close with the field name so a pilot tuned to a shared frequency knows which airport you mean — 122.9 is not unique to Grandview Medical Center Fsed.

  • Inbound, 10 miles out Grandview Medical Center Fsed traffic, Skyhawk one two three four five, one zero miles south, inbound landing, Grandview Medical Center Fsed.
  • Entering the pattern Grandview Medical Center Fsed traffic, Skyhawk one two three four five, entering left downwind , Grandview Medical Center Fsed.
  • Before taking the runway Grandview Medical Center Fsed traffic, Skyhawk one two three four five, departing , Grandview Medical Center Fsed.

Pattern direction is not always left here — check the 95AL traffic pattern before you announce a leg. The Chart Supplement is authoritative if 95AL publishes a call name that differs from the airport's. Full guidance →

Every 95AL frequency, as one table
CTAF122.9

Frequently asked

What is the CTAF at 95AL?

Grandview Medical Center Fsed is non towered. The common traffic advisory frequency is 122.9 — announce your position and intentions on entry and on each leg of the pattern.

More about 95AL

Frequencies from FAA NASR. For planning and education only; always verify against official sources.

Something here wrong or out of date? Report a data problem.