Atwood-Rawlins City-County Airport traffic pattern

Pattern altitude at Atwood-Rawlins City-County Airport (ADT · KADT) is 4,000 ft MSL (≈1,000 AGL) by the standard convention — none is published for this field, and every runway end is standard left traffic.

All of Atwood-Rawlins City-County Airport — runways, frequencies, charts and live weather

Pattern diagram

Drawn to scale from the FAA NASR runway alignments and the per end right traffic flags — pick a runway to see its pattern. Live wind picks the favored runway when KADT reports it.

5,000 ftNMNxw 077°downwind 347°base 257°final 167°45° entry17223504

RWY 17LEFT traffic

Heading
167° mag · 173° true
Dimensions
5,000 × 75 ft
TPA
4,000 ft MSL (≈1,000 AGL) · standard
Surface
Asphalt
Lights
2-light PAPI (left) (3°)
CTAF
122.7

Enter the left downwind (heading 347°) on the 45° at 4,000 ft MSL (≈1,000 AGL).

More details — RWY 17
Threshold elev
2,991 ft
Markings
nonprecision
Threshold crossing height
40 ft
TDZ elevation
2,991 ft
End lights
REIL

Condition: Good. Edge lights: Med. Weight bearing: Single wheel 12.5k, Double wheel 12.5k.

Pattern side: FAA NASR · TPA standard 1,000 ft AGL (not charted) · layout: FAA runway-end coordinates

Pattern direction by runway

RunwayPatternHeadingPattern altitude
04 Left traffic 040° mag 4,000 ft MSL (≈1,000 AGL)
22 Left traffic 220° mag 4,000 ft MSL (≈1,000 AGL)
17 Left traffic 167° mag 4,000 ft MSL (≈1,000 AGL)
35 Left traffic 347° mag 4,000 ft MSL (≈1,000 AGL)

No pattern altitude is published for KADT; the figure above is the AC 90-66B 1,000 ft AGL convention for propeller aircraft, rounded to the field. Turbine aircraft normally fly 1,500 ft AGL. Headings are the runway alignment; downwind is the reciprocal.

Flying the pattern at KADT

Atwood-Rawlins City-County Airport is non towered, so the pattern is self announced on CTAF 122.7. AC 90-66B asks for a report on entry and on each leg, and for the standard 45° entry to downwind at pattern altitude.

All ends are left traffic, which is the FAR 91.126 default — turns to the left unless the field charts otherwise. The full entry procedure is here →

Frequently asked

What is the traffic pattern altitude at KADT?

Atwood-Rawlins City-County Airport has no traffic pattern altitude published in the FAA NASR data. The AC 90-66B convention for propeller aircraft is 1,000 ft AGL, which works out to roughly 4,000 ft MSL (≈1,000 AGL) here — but confirm it against the Chart Supplement before you fly, since a field can have a non standard pattern altitude that NASR does not carry.

Does KADT have right traffic?

No. All 4 runway ends at Atwood-Rawlins City-County Airport use standard left traffic, so no right pattern is charted here.

What frequency is the pattern on at KADT?

Atwood-Rawlins City-County Airport is non towered, so pattern position reports go on the CTAF, 122.7. AC 90-66B asks for self announcing on entry and on each leg.

More about KADT

Pattern direction and alignment are drawn from the FAA NASR (28-day cycle); the diagram is generated, not an FAA chart. Pattern altitude is shown as published where NASR carries one, otherwise as the AC 90-66B 1,000 ft AGL convention. For planning and education only; always verify against the Chart Supplement.