Dayton-Wright Brothers Airport traffic pattern
Pattern altitude at Dayton-Wright Brothers Airport (MGY · KMGY) is 2,000 ft MSL (≈1,000 AGL) by the standard convention — none is published for this field, and every runway end is standard left traffic.
All of Dayton-Wright Brothers Airport — runways, frequencies, charts and live weatherPattern diagram
Drawn to scale from the FAA NASR runway alignments and the per end right traffic flags — pick a runway to see its pattern. Live wind picks the favored runway when KMGY reports it.
RWY 20LEFT traffic
- Heading
- 206° mag · 202° true
- Dimensions
- 5,000 × 100 ft
- TPA
- 2,000 ft MSL (≈1,000 AGL) · standard
- Surface
- Asphalt
- Lights
- 4-light PAPI (left) (3°) + MALS
- ILS
- LOC/DME · CAT I · LOC 109.5 (MGY)
- Displaced thr
- 590 ft
- CTAF
- 122.8
Enter the left downwind (heading 026°) on the 45° at 2,000 ft MSL (≈1,000 AGL).
More details — RWY 20
- Threshold elev
- 957 ft
- Markings
- nonprecision
- Approach obstacle
- Road, 25 ft, 540 ft from threshold, 300 ft R of centerline — 13:1 slope to clear · penetrates the 20:1 visual approach surface
- Threshold crossing height
- 39 ft
- TDZ elevation
- 955 ft
- Declared TORA/TODA/ASDA/LDA
- 5,000 / 5,000 / 5,000 / 4,410 ft
Pattern side + displaced threshold: FAA NASR · TPA standard 1,000 ft AGL (not charted) · layout: FAA runway-end coordinates
Pattern direction by runway
| Runway | Pattern | Heading | Pattern altitude |
|---|---|---|---|
| 02 | Left traffic | 026° mag | 2,000 ft MSL (≈1,000 AGL) |
| 20 | Left traffic | 206° mag | 2,000 ft MSL (≈1,000 AGL) |
No pattern altitude is published for KMGY; the figure above is the AC 90-66B 1,000 ft AGL convention for propeller aircraft, rounded to the field. Turbine aircraft normally fly 1,500 ft AGL. Headings are the runway alignment; downwind is the reciprocal.
Flying the pattern at KMGY
Dayton-Wright Brothers Airport is non towered, so the pattern is self announced on CTAF 122.8. AC 90-66B asks for a report on entry and on each leg, and for the standard 45° entry to downwind at pattern altitude.
All ends are left traffic, which is the FAR 91.126 default — turns to the left unless the field charts otherwise. The full entry procedure is here →
Frequently asked
What is the traffic pattern altitude at KMGY?
Dayton-Wright Brothers Airport has no traffic pattern altitude published in the FAA NASR data. The AC 90-66B convention for propeller aircraft is 1,000 ft AGL, which works out to roughly 2,000 ft MSL (≈1,000 AGL) here — but confirm it against the Chart Supplement before you fly, since a field can have a non standard pattern altitude that NASR does not carry.
Does KMGY have right traffic?
No. All 2 runway ends at Dayton-Wright Brothers Airport use standard left traffic, so no right pattern is charted here.
What frequency is the pattern on at KMGY?
Dayton-Wright Brothers Airport is non towered, so pattern position reports go on the CTAF, 122.8. AC 90-66B asks for self announcing on entry and on each leg.
More about KMGY
Pattern direction and alignment are drawn from the FAA NASR (28-day cycle); the diagram is generated, not an FAA chart. Pattern altitude is shown as published where NASR carries one, otherwise as the AC 90-66B 1,000 ft AGL convention. For planning and education only; always verify against the Chart Supplement.