Tonopah Airport traffic pattern

Pattern altitude at Tonopah Airport (TPH · KTPH) is 6,400 ft MSL (≈1,000 AGL) by the standard convention — none is published for this field, and every runway end is standard left traffic.

All of Tonopah Airport — runways, frequencies, charts and live weather

Pattern diagram

Drawn to scale from the FAA NASR runway alignments and the per end right traffic flags — pick a runway to see its pattern. Live wind picks the favored runway when KTPH reports it.

5,000 ftNMNxw 020°downwind 290°base 200°final 110°45° entry11152933

RWY 11LEFT traffic

Heading
110° mag · 125° true
Dimensions
5,660 × 50 ft
TPA
6,400 ft MSL (≈1,000 AGL) · standard
Surface
Asphalt
CTAF
123.0

Enter the left downwind (heading 290°) on the 45° at 6,400 ft MSL (≈1,000 AGL).

More details — RWY 11
Threshold elev
5,428 ft
Markings
basic
TDZ elevation
5,428 ft

Condition: Failed. Edge lights: Med. Weight bearing: Single wheel 30k, Double wheel 66k, Dual tandem 77k.

Pattern side: FAA NASR · TPA standard 1,000 ft AGL (not charted) · layout: FAA runway-end coordinates

Pattern direction by runway

RunwayPatternHeadingPattern altitude
11 Left traffic 110° mag 6,400 ft MSL (≈1,000 AGL)
29 Left traffic 290° mag 6,400 ft MSL (≈1,000 AGL)
15 Left traffic 150° mag 6,400 ft MSL (≈1,000 AGL)
33 Left traffic 330° mag 6,400 ft MSL (≈1,000 AGL)

No pattern altitude is published for KTPH; the figure above is the AC 90-66B 1,000 ft AGL convention for propeller aircraft, rounded to the field. Turbine aircraft normally fly 1,500 ft AGL. Headings are the runway alignment; downwind is the reciprocal.

Flying the pattern at KTPH

Tonopah Airport is non towered, so the pattern is self announced on CTAF 123.0. AC 90-66B asks for a report on entry and on each leg, and for the standard 45° entry to downwind at pattern altitude.

All ends are left traffic, which is the FAR 91.126 default — turns to the left unless the field charts otherwise. The full entry procedure is here →

Frequently asked

What is the traffic pattern altitude at KTPH?

Tonopah Airport has no traffic pattern altitude published in the FAA NASR data. The AC 90-66B convention for propeller aircraft is 1,000 ft AGL, which works out to roughly 6,400 ft MSL (≈1,000 AGL) here — but confirm it against the Chart Supplement before you fly, since a field can have a non standard pattern altitude that NASR does not carry.

Does KTPH have right traffic?

No. All 4 runway ends at Tonopah Airport use standard left traffic, so no right pattern is charted here.

What frequency is the pattern on at KTPH?

Tonopah Airport is non towered, so pattern position reports go on the CTAF, 123.0. AC 90-66B asks for self announcing on entry and on each leg.

More about KTPH

Pattern direction and alignment are drawn from the FAA NASR (28-day cycle); the diagram is generated, not an FAA chart. Pattern altitude is shown as published where NASR carries one, otherwise as the AC 90-66B 1,000 ft AGL convention. For planning and education only; always verify against the Chart Supplement.