Danford Field traffic pattern

Pattern altitude at Danford Field (MT26) is 3,900 ft MSL (≈1,000 AGL) by the standard convention — none is published for this field, and every runway end is standard left traffic. · Open on the map

All of Danford Field — runways, frequencies, charts and live weather

Pattern diagram

Drawn to scale from the FAA NASR runway alignments and the per end right traffic flags — pick a runway to see its pattern. Live wind picks the favored runway when MT26 reports it.

RWY 11LEFT traffic

Heading: 134° true
Dimensions: 1,556 × 60 ft
TPA: 3,900 ft MSL (≈1,000 AGL) · standard
Surface: Turf

Enter the left downwind (heading 314°) on the 45° at 3,900 ft MSL (≈1,000 AGL).

More details — RWY 11

Threshold elev: 2,882 ft

Pattern side: FAA NASR · TPA standard 1,000 ft AGL (not charted) · layout: FAA runway-end coordinates

Pattern direction by runway

Runway	Pattern	Heading	Pattern altitude
11	Left traffic	134° true	3,900 ft MSL (≈1,000 AGL)
29	Left traffic	314° true	3,900 ft MSL (≈1,000 AGL)

No pattern altitude is published for MT26; the figure above is the AC 90-66B 1,000 ft AGL convention for propeller aircraft, rounded to the field. Turbine aircraft normally fly 1,500 ft AGL. Headings are the runway alignment (true — magnetic variation unavailable); downwind is the reciprocal.

Flying the pattern at MT26

Danford Field is non towered. AC 90-66B asks for a report on entry and on each leg, and for the standard 45° entry to downwind at pattern altitude.

All ends are left traffic, which is the FAR 91.126 default — turns to the left unless the field charts otherwise. The full entry procedure is here →

Frequently asked

What is the traffic pattern altitude at MT26?

Danford Field has no traffic pattern altitude published in the FAA NASR data. The AC 90-66B convention for propeller aircraft is 1,000 ft AGL, which works out to roughly 3,900 ft MSL (≈1,000 AGL) here — but confirm it against the Chart Supplement before you fly, since a field can have a non standard pattern altitude that NASR does not carry.

Does MT26 have right traffic?

No. All 2 runway ends at Danford Field use standard left traffic, so no right pattern is charted here.

More about MT26

Pattern direction and alignment are drawn from the FAA NASR (28-day cycle); the diagram is generated, not an FAA chart. Pattern altitude is shown as published where NASR carries one, otherwise as the AC 90-66B 1,000 ft AGL convention. For planning and education only; always verify against the Chart Supplement.

Something here wrong or out of date? Report a data problem.