Crested Butte Airpark traffic pattern

Pattern altitude at Crested Butte Airpark (0CO2) is 10,000 ft MSL (≈1,000 AGL) by the standard convention — none is published for this field, and 11 is charted right traffic. · Open on the map

All of Crested Butte Airpark — runways, frequencies, charts and live weather

Pattern diagram

Drawn to scale from the FAA NASR runway alignments and the per end right traffic flags — pick a runway to see its pattern. Live wind picks the favored runway when 0CO2 reports it.

5,000 ftNMNxw 200°downwind 290°base 020°final 110°45° entry1129

RWY 11RIGHT trafficRP · charted

Heading
110° mag · 122° true
Dimensions
4,000 × 40 ft
TPA
10,000 ft MSL (≈1,000 AGL) · standard
Surface
Asphalt
CTAF
122.8

Enter the right downwind (heading 290°) on the 45° at 10,000 ft MSL (≈1,000 AGL).

More details — RWY 11
Approach obstacle
Fence, 4 ft, 250 ft from threshold, 0 ft B of centerline — 4:1 slope to clear · penetrates the 20:1 visual approach surface

Edge lights: Nstd.

Pattern side: FAA NASR · TPA standard 1,000 ft AGL (not charted) · layout: schematic (headings + lengths)

Pattern direction by runway

RunwayPatternHeadingPattern altitude
11 Right traffic 110° mag 10,000 ft MSL (≈1,000 AGL)
29 Left traffic 290° mag 10,000 ft MSL (≈1,000 AGL)

No pattern altitude is published for 0CO2; the figure above is the AC 90-66B 1,000 ft AGL convention for propeller aircraft, rounded to the field. Turbine aircraft normally fly 1,500 ft AGL. Headings are the runway alignment; downwind is the reciprocal.

Flying the pattern at 0CO2

Crested Butte Airpark is non towered, so the pattern is self announced on CTAF 122.8. AC 90-66B asks for a report on entry and on each leg, and for the standard 45° entry to downwind at pattern altitude.

Watch the right traffic ends here: 11. A right pattern at a field where the other end is left is the single most common place to end up pointing at opposing traffic. The full entry procedure is here →

Frequently asked

What is the traffic pattern altitude at 0CO2?

Crested Butte Airpark has no traffic pattern altitude published in the FAA NASR data. The AC 90-66B convention for propeller aircraft is 1,000 ft AGL, which works out to roughly 10,000 ft MSL (≈1,000 AGL) here — but confirm it against the Chart Supplement before you fly, since a field can have a non standard pattern altitude that NASR does not carry.

Does 0CO2 have right traffic?

Yes, on one runway end: 11. Every other end at Crested Butte Airpark is standard left traffic.

What frequency is the pattern on at 0CO2?

Crested Butte Airpark is non towered, so pattern position reports go on the CTAF, 122.8. AC 90-66B asks for self announcing on entry and on each leg.

More about 0CO2

Pattern direction and alignment are drawn from the FAA NASR (28-day cycle); the diagram is generated, not an FAA chart. Pattern altitude is shown as published where NASR carries one, otherwise as the AC 90-66B 1,000 ft AGL convention. For planning and education only; always verify against the Chart Supplement.

Something here wrong or out of date? Report a data problem.