Flying Joseph Ranch frequencies
Flying Joseph Ranch (0ID2) in May, ID has no control tower, so nobody is sequencing traffic here — you announce your own position on 130.3. Every frequency below is in the order you tune it. · Open on the map
All of Flying Joseph Ranch — runways, frequencies, charts and live weatherTaxi & takeoff
- CTAF 130.3
- The common frequency pilots use to announce themselves to each other at a field with no operating control tower. Nobody is controlling traffic — you are self announcing. Report your position and intentions on entry and on each leg of the pattern, and listen well before you transmit.
What to say on 130.3
Nobody is sequencing traffic at 0ID2, so every call is you telling other aircraft where you are. Open and close with the field name so a pilot tuned to a shared frequency knows which airport you mean — 130.3 is not unique to Flying Joseph Ranch.
- Inbound, 10 miles out
Flying Joseph Ranch traffic, Skyhawk one two three four five, one zero miles south, inbound landing runway 11, Flying Joseph Ranch.
- Entering the pattern
Flying Joseph Ranch traffic, Skyhawk one two three four five, entering left downwind runway 11, Flying Joseph Ranch.
- Before taking the runway
Flying Joseph Ranch traffic, Skyhawk one two three four five, departing runway 11, Flying Joseph Ranch.
Pattern direction is not always left here — check the 0ID2 traffic pattern before you announce a leg. The Chart Supplement is authoritative if 0ID2 publishes a call name that differs from the airport's. Full guidance →
Every 0ID2 frequency, as one table
| CTAF | 130.3 |
|---|
Frequently asked
What is the CTAF at 0ID2?
Flying Joseph Ranch is non towered. The common traffic advisory frequency is 130.3 — announce your position and intentions on entry and on each leg of the pattern.
More about 0ID2
Frequencies from FAA NASR. For planning and education only; always verify against official sources.
Something here wrong or out of date? Report a data problem.