Wood County Airport traffic pattern

Pattern altitude at Wood County Airport (1G0) is 1,700 ft MSL · 1,027 AGL as published by the FAA, and 28, 36 are charted right traffic. · Open on the map

All of Wood County Airport — runways, frequencies, charts and live weather

Pattern diagram

Drawn to scale from the FAA NASR runway alignments and the per end right traffic flags — pick a runway to see its pattern. Live wind picks the favored runway when 1G0 reports it.

5,000 ftNMNxw 006°downwind 276°base 186°final 096°45° entry10182836

RWY 10LEFT traffic

Heading
096° mag · 091° true
Dimensions
4,199 × 75 ft
TPA
1,700 ft MSL · 1,027 AGL · charted
Surface
Asphalt
Lights
2-light PAPI (left) (3°)
CTAF
122.975

Enter the left downwind (heading 276°) on the 45° at 1,700 ft MSL.

More details — RWY 10
Threshold elev
672 ft
Markings
nonprecision
Approach obstacle
Crops, 3 ft, 201 ft from threshold, 165 ft L/R of centerline
Threshold crossing height
41 ft
TDZ elevation
673 ft
End lights
REIL

Condition: Good. Edge lights: Med.

Pattern side: FAA NASR · TPA charted (NASR) · layout: FAA runway-end coordinates

Pattern direction by runway

RunwayPatternHeadingPattern altitude
10 Left traffic 096° mag 1,700 ft MSL · 1,027 AGL
28 Right traffic 276° mag 1,700 ft MSL · 1,027 AGL
18 Left traffic 184° mag 1,700 ft MSL · 1,027 AGL
36 Right traffic 004° mag 1,700 ft MSL · 1,027 AGL

Pattern altitude is published for 1G0 in the FAA NASR data. Headings are the runway alignment; downwind is the reciprocal.

Flying the pattern at 1G0

Wood County Airport is non towered, so the pattern is self announced on CTAF 122.975. AC 90-66B asks for a report on entry and on each leg, and for the standard 45° entry to downwind at pattern altitude.

Watch the right traffic ends here: 28, 36. A right pattern at a field where the other end is left is the single most common place to end up pointing at opposing traffic. The full entry procedure is here →

Frequently asked

What is the traffic pattern altitude at 1G0?

The FAA publishes a traffic pattern altitude of 1,027 ft AGL for Wood County Airport, which is 1,700 ft MSL on the altimeter with the field at 673 ft.

Does 1G0 have right traffic?

Yes, on 2 runway ends: 28, 36. Every other end at Wood County Airport is standard left traffic.

What frequency is the pattern on at 1G0?

Wood County Airport is non towered, so pattern position reports go on the CTAF, 122.975. AC 90-66B asks for self announcing on entry and on each leg.

More about 1G0

Pattern direction and alignment are drawn from the FAA NASR (28-day cycle); the diagram is generated, not an FAA chart. Pattern altitude is shown as published where NASR carries one, otherwise as the AC 90-66B 1,000 ft AGL convention. For planning and education only; always verify against the Chart Supplement.