Brushy Fork Field Private

20KT · McDaniels, KY · Non-towered · Print kneeboard · Open on the map

Elevation
576 ft MSL
Longest runway
2,700 ft 10/28
Runway
1

Nearby now

Loading…

Weather

METAR observed

No weather station at 20KT. Nearby reporting stations: KJQD (22 NM), KTEL (23 NM), KEKX (26 NM).

TAF forecast

Loading forecast…

Sun & FAA night2026-09-18 · night begins 07:16 PM
EventLocal (CDT)UTC
Morning civil twilight
Loggable night ends
06:04 AM11:04Z
Sunrise06:30 AM11:30Z
Sunset06:49 PM23:49Z
Evening civil twilight
Loggable night begins
07:16 PM00:16Z
Loggable night (§1.1)
07:16 PM → 06:04 AM
Night currency (§61.57)
07:49 PM → 05:30 AM

Plan a flight from 20KT

Winds aloft NOAA forecast · 3,000 to 53,000 ft

Loading winds aloft…

Full reports: nearest reporting station

Advisories

NOTAMs · Loading NOTAMs…

Pilot reports · Loading PIREPs…

Airspace hazards · Checking SIGMETs and G-AIRMETs…

Temporary flight restrictions · Checking for TFRs…

Runways

5,000 ftNxw 010°downwind 280°base 190°final 100°45° entry1028

RWY 10LEFT traffic

Heading
100° true
Dimensions
2,700 × 50 ft
TPA
1,600 ft MSL (≈1,000 AGL) · standard
Surface
Turf

Enter the left downwind (heading 280°) on the 45° at 1,600 ft MSL (≈1,000 AGL).

Pattern side: FAA NASR · TPA standard 1,000 ft AGL (not charted) · layout: schematic (headings + lengths)

Headings shown are true (magnetic variation unavailable).

ft · ≥1.5× comfortable, under 1.25× tight · saved across airports

Prefer one flat page? Full runway details for 20KT → · New to pattern entries? The 45° entry, explained → · Teaching here? Print the 20KT kneeboard →

Comms & NavAids

Nearby navigation aids

MYS 108.20 · FTK 109.60 · OWB 108.65 · +1
NavAidTypeFreq · chRangeRadial / Dist magnetic
MYS · Mystic VOR 108.20 Low r221° / 16.7 NM
FTK · Fort Knox VOR/DME 109.60 · 33X Terminal r241° / 27.2 NM
OWB · Owensboro VOR/DME 108.65 · 23Y Low r100° / 33.3 NM
EWO · New Hope VOR/DME 113.95 · 86Y Low r274° / 37.8 NM

Charts & procedures

No published instrument procedures or Chart Supplement for 20KT — open it on the VFR sectional →

Airport info

Airport information

FAA LID
20KT
Coordinates
37.6806, -86.4693
Elevation
576 ft MSL
Sectional chart
ST LOUIS
Airport use
Private
Control tower
No
ARTCC
INDIANAPOLIS (ZID)
Flight service (FSS)
LOUISVILLE · 122.2 · 1-800-WX-BRIEF
Attendance
UNATNDD
Segmented circle
No
Wind indicator
yes
Activated
2015/11
Distance from city
5 NW
Ownership & management 2 contacts
Owner
NANCY HENNING
2540 JIM BOB MATTINGLY ROAD, HARDINSBURG, KY
(270) 200-3605
Manager
NANCY HENNING
2540 JIM BOB MATTINGLY ROAD, HARDINSBURG, KY
(270) 200-3605
Remarks FAA · 1 notes

General

  • FOR CD CTC LOUISVILLE APCH AT 502-375-7499

Nearby airports

Loading nearby conditions…

Also nearby: 2I3 Rough River State Park (5 NM) · I93 Breckinridge County (6 NM) · 66KY Mc Grew (private) (16 NM) · M20 Leitchfield-Grayson County (20 NM)

About 20KT

Brushy Fork Field (20KT) is an airport in McDaniels, KY, at 576 ft MSL. It has 1 runway, the longest 2,700 ft, with no control tower (pilot-controlled). This page shows live METAR/TAF weather, runway crosswinds, frequencies, navaids, and FAA charts for 20KT, refreshed from the Aviation Weather Center and FAA NASR.

Does 20KT have a control tower?

No. Brushy Fork Field is a non-towered (pilot-controlled) airport; use the published CTAF/UNICOM in the Comms & NavAids section.

What is the longest runway at 20KT?

Brushy Fork Field has 1 runway; the longest is 2,700 ft. See the Runways section for headings, surface, and lighting.

Where is 20KT?

Brushy Fork Field is in McDaniels, KY, at an elevation of 576 ft MSL. Coordinates: 37.6806, -86.4693.

More about 20KT

Weather is live from the Aviation Weather Center; airport facility data is from the FAA NASR (28-day cycle). For planning and education only; always verify against official sources. Open 20KT in a full tool: METAR/TAF decoder, crosswind calculator, sun & night times, or the density altitude calculator. Planning from here? Find the nearest airport with fuel or an approach, or check whether an IFR alternate is required.

Something here wrong or out of date? Report a data problem.