Mountain Air frequencies

Mountain Air (2NC0) in Burnsville, NC has no control tower, so nobody is sequencing traffic here — you announce your own position on 122.725. Every frequency below is in the order you tune it. · Open on the map

All of Mountain Air — runways, frequencies, charts and live weather

Taxi & takeoff

CTAF 122.725
The common frequency pilots use to announce themselves to each other at a field with no operating control tower. Nobody is controlling traffic — you are self announcing. Report your position and intentions on entry and on each leg of the pattern, and listen well before you transmit.
UNICOM 122.725
A ground station run by the FBO rather than the FAA, for fuel, parking and airport services. Use it for services. Where the field has no separate CTAF, the same frequency doubles as the advisory frequency.

What to say on 122.725

Nobody is sequencing traffic at 2NC0, so every call is you telling other aircraft where you are. Open and close with the field name so a pilot tuned to a shared frequency knows which airport you mean — 122.725 is not unique to Mountain Air.

  • Inbound, 10 miles out Mountain Air traffic, Skyhawk one two three four five, one zero miles south, inbound landing runway 14, Mountain Air.
  • Entering the pattern Mountain Air traffic, Skyhawk one two three four five, entering left downwind runway 14, Mountain Air.
  • Before taking the runway Mountain Air traffic, Skyhawk one two three four five, departing runway 14, Mountain Air.

Pattern direction is not always left here — check the 2NC0 traffic pattern before you announce a leg. The Chart Supplement is authoritative if 2NC0 publishes a call name that differs from the airport's. Full guidance →

Every 2NC0 frequency, as one table
CTAF122.725
UNICOM122.725

Frequently asked

What is the CTAF at 2NC0?

Mountain Air is non towered. The common traffic advisory frequency is 122.725 — announce your position and intentions on entry and on each leg of the pattern.