Hank Sasser/Breakaway frequencies
Hank Sasser/Breakaway (40XS) in Cedar Park, TX has no control tower, so nobody is sequencing traffic here — you announce your own position on 122.9. Every frequency below is in the order you tune it. · Open on the map
All of Hank Sasser/Breakaway — runways, frequencies, charts and live weatherTaxi & takeoff
- CTAF 122.9
- The common frequency pilots use to announce themselves to each other at a field with no operating control tower. Nobody is controlling traffic — you are self announcing. Report your position and intentions on entry and on each leg of the pattern, and listen well before you transmit.
What to say on 122.9
Nobody is sequencing traffic at 40XS, so every call is you telling other aircraft where you are. Open and close with the field name so a pilot tuned to a shared frequency knows which airport you mean — 122.9 is not unique to Hank Sasser/Breakaway.
- Inbound, 10 miles out
Hank Sasser Breakaway traffic, Skyhawk one two three four five, one zero miles south, inbound landing runway 15, Hank Sasser Breakaway.
- Entering the pattern
Hank Sasser Breakaway traffic, Skyhawk one two three four five, entering left downwind runway 15, Hank Sasser Breakaway.
- Before taking the runway
Hank Sasser Breakaway traffic, Skyhawk one two three four five, departing runway 15, Hank Sasser Breakaway.
Pattern direction is not always left here — check the 40XS traffic pattern before you announce a leg. The Chart Supplement is authoritative if 40XS publishes a call name that differs from the airport's. Full guidance →
Every 40XS frequency, as one table
| CTAF | 122.9 |
|---|
Frequently asked
What is the CTAF at 40XS?
Hank Sasser/Breakaway is non towered. The common traffic advisory frequency is 122.9 — announce your position and intentions on entry and on each leg of the pattern.
More about 40XS
Frequencies from FAA NASR. For planning and education only; always verify against official sources.
Something here wrong or out of date? Report a data problem.