Miller Strip frequencies
Miller Strip (82WY) in Lusk, WY has no control tower, so nobody is sequencing traffic here — you announce your own position on 122.9. Every frequency below is in the order you tune it. · Open on the map
All of Miller Strip — runways, frequencies, charts and live weatherTaxi & takeoff
- CTAF 122.9
- The common frequency pilots use to announce themselves to each other at a field with no operating control tower. Nobody is controlling traffic — you are self announcing. Report your position and intentions on entry and on each leg of the pattern, and listen well before you transmit.
What to say on 122.9
Nobody is sequencing traffic at 82WY, so every call is you telling other aircraft where you are. Open and close with the field name so a pilot tuned to a shared frequency knows which airport you mean — 122.9 is not unique to Miller Strip.
- Inbound, 10 miles out
Miller Strip traffic, Skyhawk one two three four five, one zero miles south, inbound landing runway 12, Miller Strip.
- Entering the pattern
Miller Strip traffic, Skyhawk one two three four five, entering left downwind runway 12, Miller Strip.
- Before taking the runway
Miller Strip traffic, Skyhawk one two three four five, departing runway 12, Miller Strip.
Pattern direction is not always left here — check the 82WY traffic pattern before you announce a leg. The Chart Supplement is authoritative if 82WY publishes a call name that differs from the airport's. Full guidance →
Every 82WY frequency, as one table
| CTAF | 122.9 |
|---|
Frequently asked
What is the CTAF at 82WY?
Miller Strip is non towered. The common traffic advisory frequency is 122.9 — announce your position and intentions on entry and on each leg of the pattern.
More about 82WY
Frequencies from FAA NASR. For planning and education only; always verify against official sources.
Something here wrong or out of date? Report a data problem.