Richmond International Airport traffic pattern

Pattern altitude at Richmond International Airport (RIC · KRIC) is 1,200 ft MSL (≈1,000 AGL) by the standard convention — none is published for this field, and every runway end is standard left traffic.

All of Richmond International Airport — runways, frequencies, charts and live weather

Pattern diagram

Drawn to scale from the FAA NASR runway alignments and the per end right traffic flags — pick a runway to see its pattern. Live wind picks the favored runway when KRIC reports it.

5,000 ftNMNxw 068°downwind 338°base 248°final 158°45° entry16203402

RWY 16LEFT traffic

Heading
158° mag · 148° true
Dimensions
9,003 × 150 ft
TPA
1,200 ft MSL (≈1,000 AGL) · standard
Surface
Asphalt
Lights
4-light PAPI (left) (3°) + MALSR
ILS
ILS · CAT I · LOC 110.7 (RGJ) · GS 3.00°
CTAF
122.95
More details — RWY 16
Threshold elev
167 ft
Markings
precision
Threshold crossing height
71 ft
TDZ elevation
167 ft
Declared TORA/TODA/ASDA/LDA
9,003 / 9,003 / 9,003 / 9,003 ft
End lights
centerline

Condition: Good. Edge lights: High. Surface: Grooved. Weight bearing: Single wheel 125k, Double wheel 238k, Dual tandem 409k, Double dual tandem 944k.

Pattern side: FAA NASR · TPA standard 1,000 ft AGL (not charted) · layout: FAA runway-end coordinates

Pattern direction by runway

RunwayPatternHeadingPattern altitude
02 Left traffic 023° mag 1,200 ft MSL (≈1,000 AGL)
20 Left traffic 203° mag 1,200 ft MSL (≈1,000 AGL)
16 Left traffic 157° mag 1,200 ft MSL (≈1,000 AGL)
34 Left traffic 337° mag 1,200 ft MSL (≈1,000 AGL)

No pattern altitude is published for KRIC; the figure above is the AC 90-66B 1,000 ft AGL convention for propeller aircraft, rounded to the field. Turbine aircraft normally fly 1,500 ft AGL. Headings are the runway alignment; downwind is the reciprocal.

Flying the pattern at KRIC

Richmond International Airport is towered, working 121.1. Contact the tower before entering the surface area and fly the pattern you are assigned — the directions below are the charted default when no instruction is given.

All ends are left traffic, which is the FAR 91.126 default — turns to the left unless the field charts otherwise. The full entry procedure is here →

Frequently asked

What is the traffic pattern altitude at KRIC?

Richmond International Airport has no traffic pattern altitude published in the FAA NASR data. The AC 90-66B convention for propeller aircraft is 1,000 ft AGL, which works out to roughly 1,200 ft MSL (≈1,000 AGL) here — but confirm it against the Chart Supplement before you fly, since a field can have a non standard pattern altitude that NASR does not carry.

Does KRIC have right traffic?

No. All 4 runway ends at Richmond International Airport use standard left traffic, so no right pattern is charted here.

Do I fly a standard pattern at KRIC?

Richmond International Airport is towered (121.1), so the pattern shown here is the charted default — but the controller's instruction overrides it. Expect straight in approaches, base entries and midfield crossings as traffic dictates.

More about KRIC

Pattern direction and alignment are drawn from the FAA NASR (28-day cycle); the diagram is generated, not an FAA chart. Pattern altitude is shown as published where NASR carries one, otherwise as the AC 90-66B 1,000 ft AGL convention. For planning and education only; always verify against the Chart Supplement.