Mountainair Municipal frequencies
Mountainair Municipal (M10) in Mountainair, NM has no control tower, so nobody is sequencing traffic here — you announce your own position on 122.9. Every frequency below is in the order you tune it. · Open on the map
All of Mountainair Municipal — runways, frequencies, charts and live weatherTaxi & takeoff
- CTAF 122.9
- The common frequency pilots use to announce themselves to each other at a field with no operating control tower. Nobody is controlling traffic — you are self announcing. Report your position and intentions on entry and on each leg of the pattern, and listen well before you transmit.
What to say on 122.9
Nobody is sequencing traffic at M10, so every call is you telling other aircraft where you are. Open and close with the field name so a pilot tuned to a shared frequency knows which airport you mean — 122.9 is not unique to Mountainair Municipal.
- Inbound, 10 miles out
Mountainair traffic, Skyhawk one two three four five, one zero miles south, inbound landing runway 08, Mountainair.
- Entering the pattern
Mountainair traffic, Skyhawk one two three four five, entering left downwind runway 08, Mountainair.
- Before taking the runway
Mountainair traffic, Skyhawk one two three four five, departing runway 08, Mountainair.
Pattern direction is not always left here — check the M10 traffic pattern before you announce a leg. The Chart Supplement is authoritative if M10 publishes a call name that differs from the airport's. Full guidance →
Every M10 frequency, as one table
| CTAF | 122.9 |
|---|
Frequently asked
What is the CTAF at M10?
Mountainair Municipal is non towered. The common traffic advisory frequency is 122.9 — announce your position and intentions on entry and on each leg of the pattern.
More about M10
Frequencies from FAA NASR. For planning and education only; always verify against official sources.
Something here wrong or out of date? Report a data problem.