Meyer Riverside Airpark traffic pattern

Pattern altitude at Meyer Riverside Airpark (OG34) is 1,300 ft MSL (≈1,000 AGL) by the standard convention — none is published for this field, and every runway end is standard left traffic. · Open on the map

All of Meyer Riverside Airpark — runways, frequencies, charts and live weather

Pattern diagram

Drawn to scale from the FAA NASR runway alignments and the per end right traffic flags — pick a runway to see its pattern. Live wind picks the favored runway when OG34 reports it.

RWY 16LEFT traffic

Heading: 160° mag · 179° true
Dimensions: 1,585 × 100 ft
TPA: 1,300 ft MSL (≈1,000 AGL) · standard
Surface: Turf

Enter the left downwind (heading 340°) on the 45° at 1,300 ft MSL (≈1,000 AGL).

More details — RWY 16

Approach obstacle: Plines, 10 ft from threshold

Pattern side: FAA NASR · TPA standard 1,000 ft AGL (not charted) · layout: schematic (headings + lengths)

Pattern direction by runway

Runway	Pattern	Heading	Pattern altitude
16	Left traffic	160° mag	1,300 ft MSL (≈1,000 AGL)
34	Left traffic	340° mag	1,300 ft MSL (≈1,000 AGL)

No pattern altitude is published for OG34; the figure above is the AC 90-66B 1,000 ft AGL convention for propeller aircraft, rounded to the field. Turbine aircraft normally fly 1,500 ft AGL. Headings are the runway alignment; downwind is the reciprocal.

Flying the pattern at OG34

Meyer Riverside Airpark is non towered. AC 90-66B asks for a report on entry and on each leg, and for the standard 45° entry to downwind at pattern altitude.

All ends are left traffic, which is the FAR 91.126 default — turns to the left unless the field charts otherwise. The full entry procedure is here →

Frequently asked

What is the traffic pattern altitude at OG34?

Meyer Riverside Airpark has no traffic pattern altitude published in the FAA NASR data. The AC 90-66B convention for propeller aircraft is 1,000 ft AGL, which works out to roughly 1,300 ft MSL (≈1,000 AGL) here — but confirm it against the Chart Supplement before you fly, since a field can have a non standard pattern altitude that NASR does not carry.

Does OG34 have right traffic?

No. All 2 runway ends at Meyer Riverside Airpark use standard left traffic, so no right pattern is charted here.

More about OG34

Pattern direction and alignment are drawn from the FAA NASR (28-day cycle); the diagram is generated, not an FAA chart. Pattern altitude is shown as published where NASR carries one, otherwise as the AC 90-66B 1,000 ft AGL convention. For planning and education only; always verify against the Chart Supplement.

Something here wrong or out of date? Report a data problem.