Steele Farms Airport Private

90MS · Hollandale, MS · Non-towered · Print kneeboard

Elevation
110 ft MSL
Longest runway
2,900 ft 18/36
Runway
1

Nearby now

Loading…

Weather

METAR observed

Loading current weather…

TAF forecast

Loading forecast…

Sun & FAA night2026-08-04 · night begins 08:28 PM
EventLocal (CDT)UTC
Morning civil twilight
Loggable night ends
05:52 AM10:52Z
Sunrise06:19 AM11:19Z
Sunset08:01 PM01:01Z
Evening civil twilight
Loggable night begins
08:28 PM01:28Z
Loggable night (§1.1)
08:28 PM → 05:52 AM
Night currency (§61.57)
09:01 PM → 05:19 AM

Plan a flight from 90MS

Winds aloft NOAA forecast · 3,000 to 53,000 ft

Loading winds aloft…

Advisories

NOTAMs

Loading NOTAMs…

Pilot reports

Loading PIREPs…

Airspace hazards

Checking advisories…

Runways

5,000 ftNxw 270°downwind 000°base 090°final 180°45° entry1836

RWY 18RIGHT trafficRP · charted

Heading
180° true
Dimensions
2,900 × 80 ft
TPA
1,100 ft MSL (≈1,000 AGL) · standard
Surface
Concrete

Enter the right downwind (heading 000°) on the 45° at 1,100 ft MSL (≈1,000 AGL).

More details — RWY 18
Markings
nonstandard

Condition: Fair.

Pattern side: FAA NASR · TPA standard 1,000 ft AGL (not charted) · layout: schematic (headings + lengths)

Headings shown are true (magnetic variation unavailable).

ft · ≥1.5× comfortable, under 1.25× tight · saved across airports

Prefer one flat page? Full runway details for 90MS → · New to pattern entries? The 45° entry, explained → · Teaching here? Print the 90MS kneeboard →

Comms & NavAids

Nearby navigation aids

GLH 114.25
NavAidTypeFreq · chRangeRadial / Dist magnetic
GLH · Greenville VOR/DME 114.25 · 89Y Low r186° / 23.2 NM

Charts & procedures

No published instrument procedures or Chart Supplement for 90MS — open it on the VFR sectional →

Airport info

Airport information

FAA LID
90MS
Coordinates
33.1433, -91.0600
Elevation
110 ft MSL
Sectional chart
MEMPHIS
Airport use
Private
Control tower
No
ARTCC
MEMPHIS (ZME)
Flight service (FSS)
GREENWOOD · 122.2, 122.5 · 1-800-WX-BRIEF
Attendance
IREG
Segmented circle
No
Wind indicator
yes
Activated
2011/04
Distance from city
12 W
Ownership & management 2 contacts
Owner
GIBSON STEELE
90 RIVERSIDE RD, HOLLANDALE, MS
662-820-8757
Manager
CHARLES STEELE
1885 LAKE WASHINGTON ROAD, CHATHAM, MS
662-820-8757
Remarks FAA · 2 notes

General

  • FOR CD CTC MEMPHIS ARTCC AT 901-368-8453/8449.

Runways

  • RY 18/36 BASIC MARKINGS NSTD, NO NUMBERS.

Nearby airports

Loading nearby conditions…

Also nearby: MS86 Oglesby Farms Inc. Airport (6 NM) · MS13 Eifling Farms Airport (private) (7 NM) · MS75 Lewis Airport (private) (8 NM) · MS30 Abide Airpark (10 NM) · MS35 Wade Airport (private) (11 NM) · MS15 Country Club Airport (11 NM)

About 90MS

Steele Farms Airport (90MS) is an airport in Hollandale, MS, at 110 ft MSL. It has 1 runway, the longest 2,900 ft, with no control tower (pilot-controlled). This page shows live METAR/TAF weather, runway crosswinds, frequencies, navaids, and FAA charts for 90MS, refreshed from the Aviation Weather Center and FAA NASR.

Does 90MS have a control tower?

No. Steele Farms Airport is a non-towered (pilot-controlled) airport; use the published CTAF/UNICOM in the Comms & NavAids section.

What is the longest runway at 90MS?

Steele Farms Airport has 1 runway; the longest is 2,900 ft. See the Runways section for headings, surface, and lighting.

Where is 90MS?

Steele Farms Airport is in Hollandale, MS, at an elevation of 110 ft MSL. Coordinates: 33.1433, -91.0600.

Fly out of 90MS often?

Save 90MS as your home base in the SkyReady app for a one-tap Go/No-Go readiness brief, weather alerts, and automatic FAA currency — free to log.

Get the appSoon

Weather is live from the Aviation Weather Center; airport facility data is from the FAA NASR (28-day cycle). For planning and education only; always verify against official sources. Open 90MS in a full tool: METAR/TAF decoder, crosswind calculator, sun & night times, or the density altitude calculator. Planning from here? Find the nearest airport with fuel or an approach, or check whether an IFR alternate is required.