Readdick Field Private
GA36 · Kingsland, GA · Non-towered · Print kneeboard · Open on the map
Nearby now
Loading…
Weather
METAR observed
TAF forecast
Loading forecast…
Sun & FAA night2026-09-18 · night begins 07:53 PM
| Event | Local (EDT) | UTC |
|---|---|---|
| Morning civil twilight Loggable night ends | 06:49 AM | 10:49Z |
| Sunrise | 07:13 AM | 11:13Z |
| Sunset | 07:29 PM | 23:29Z |
| Evening civil twilight Loggable night begins | 07:53 PM | 23:53Z |
Plan a flight from GA36
Winds aloft NOAA forecast · 3,000 to 53,000 ft
Loading winds aloft…
Full reports: nearest reporting station
Advisories
NOTAMs · Loading NOTAMs…
Pilot reports · Loading PIREPs…
Airspace hazards · Checking SIGMETs and G-AIRMETs…
Temporary flight restrictions · Checking for TFRs…
Runways
RWY 18LEFT traffic
- Heading
- 183° true
- Dimensions
- 3,400 × 75 ft
- TPA
- 1,000 ft MSL (≈1,000 AGL) · standard
- Surface
- Turf
- CTAF
- 122.9
Enter the left downwind (heading 003°) on the 45° at 1,000 ft MSL (≈1,000 AGL).
More details — RWY 18
- Threshold elev
- 20 ft
Pattern side: FAA NASR · TPA standard 1,000 ft AGL (not charted) · layout: FAA runway-end coordinates
Headings shown are true (magnetic variation unavailable).
| Runway | Length | Your margin |
|---|---|---|
| 18/36 | 3,400 ft |
Prefer one flat page? Full runway details for GA36 → · New to pattern entries? The 45° entry, explained → · Teaching here? Print the GA36 kneeboard →
Comms & NavAids
Communication frequencies
Taxi & takeoff
Source: FAA NASR (current 28-day cycle).
Nearby navigation aids
SSI 109.80 · NRB 111.40 · CRG 114.50 · +1
| NavAid | Type | Freq · ch | Range | Radial / Dist magnetic |
|---|---|---|---|---|
| SSI · Brunswick | VORTAC | 109.80 · 35X | Low | r223° / 22 NM |
| NRB · Mayport | TACAN | 111.40 · 51X | — | r332° / 27.3 NM |
| CRG · Craig | VORTAC | 114.50 · 92X | High | r340° / 27.8 NM |
| NIP · Jacksonville | TACAN | 108.20 · 19X | — | r002° / 32 NM |
Prefer one flat list? All GA36 frequencies →
Charts & procedures
No published instrument procedures or Chart Supplement for GA36 — open it on the VFR sectional →
Airport info
Airport information
- FAA LID
- GA36
- Coordinates
- 30.7669, -81.7167
- Elevation
- 20 ft MSL
- Sectional chart
- JACKSONVILLE
- Airport use
- Private
- Control tower
- No
- ARTCC
- JACKSONVILLE (ZJX)
- Flight service (FSS)
- MACON · 1-800-WX-BRIEF
- Segmented circle
- No
- Activated
- 2020/02
- Distance from city
- 2 SW
Night operations
- Pilot-controlled lighting
- Usually keyed on CTAF 122.9 — confirm the click sequence in the Chart Supplement
FAA night windows (civil twilight, loggable night §1.1, currency §61.57) are under Sun & FAA night in the Weather section.
Ownership & management 2 contacts
Nearby airports
Loading nearby conditions…
Also nearby: 01J Hilliard Airpark (11 NM) · FL84 Flying-A-Ranch (private) (12 NM) · 83FL Nassau (private) (13 NM) · GA20 Stafford (private) (13 NM) · 3J6 Davis Field (16 NM)
About GA36
Readdick Field (GA36) is an airport in Kingsland, GA, at 20 ft MSL. It has 1 runway, the longest 3,400 ft, with no control tower (pilot-controlled). This page shows live METAR/TAF weather, runway crosswinds, frequencies, navaids, and FAA charts for GA36, refreshed from the Aviation Weather Center and FAA NASR.
Does GA36 have a control tower?
No. Readdick Field is a non-towered (pilot-controlled) airport; use the published CTAF/UNICOM in the Comms & NavAids section.
What is the longest runway at GA36?
Readdick Field has 1 runway; the longest is 3,400 ft. See the Runways section for headings, surface, and lighting.
Where is GA36?
Readdick Field is in Kingsland, GA, at an elevation of 20 ft MSL. Coordinates: 30.7669, -81.7167.
More about GA36
Weather is live from the Aviation Weather Center; airport facility data is from the FAA NASR (28-day cycle). For planning and education only; always verify against official sources. Open GA36 in a full tool: METAR/TAF decoder, crosswind calculator, sun & night times, or the density altitude calculator. Planning from here? Find the nearest airport with fuel or an approach, or check whether an IFR alternate is required.
Something here wrong or out of date? Report a data problem.